V3 Clarification Needed Pinned Vehicles
Home › Forums › Historical › Bolt Action › V3 Clarification Needed Pinned Vehicles
- This topic has 2 replies, 2 voices, and was last updated 2 weeks, 3 days ago by Andrew Harding.
-
AuthorPosts
-
September 22, 2024 at 10:14 am #190470Andrew HardingParticipant
Ok so picked my rule book up yesterday at the open day which was great but i need clarification on the subject above. On page 132 “Effects of Pinning on Vehicles” The book states a pinned vehicle that fails an order test must reverse. And on page 133 we have “Reverse moves” for clarification does the reverse from pinning a tracked vehicle reverse 9″ or 4.5″ E.G what is half the standard speed as it states Advance move is used for reversing.
Any help much appreciated.
Andy
September 23, 2024 at 1:35 am #190471Stuart HarrisonParticipant4.5″ tracked/6″ wheeled unless it’s recce – nothing in the pinning rules suggests any increase over the normal reverse speed. If it’s recce, since it has to move as fast as possible it would have to reverse at full advance speed, or run speed if it has dual direction steering (or a similar rule). You can also confirm in the recce rule, p150 – para starting “When reversing, either voluntarily or as a result of a failed order test…”
- This reply was modified 2 weeks, 3 days ago by Stuart Harrison.
September 23, 2024 at 9:01 pm #190473Andrew HardingParticipantThank you Stuart 🙂
-
AuthorPosts
- You must be logged in to reply to this topic.